User manual

Chapter 2 - Managing a Single Device/Cell Air Interface Noise Floor Parameters Page
AlvariCRAFT Device Manager 72 User Manual
The Noise Floor Parameters page includes the following components:
Figure 2-19: Noise Floor Parameters Page
Field Calibration Status Indicating whether a Field Calibration is being performed currently
(Active or Inactive)
Last Field Calibration
Result
Indicating the result of the last Field calibration process (Passed,
Failed or None if no Field calibration has been done).
Selected Calibration
Option
The drop-down menu includes only the available options:
None is available always.
Factory is available only if the unit was calibrated in factory (not
available in current release).
Field is available only if a successful Field calibration has been
performed.
Run Calibration Click on the button to perform a Field calibration.
Bandwidth Used for Last
Field Calibration (MHz)
The bandwidth used for last Field calibration. A new Field calibration
should be performed after changing the bandwidth (sub-band) used
by the device.