User manual

Chapter 2 - Managing a Single Device/Cell Air Interface Spectrum Analysis Page
AlvariCRAFT Device Manager 61 User Manual
The Air Interface Spectrum Analysis Page includes the following sections:
 Spectrum Analysis Parameters
 Spectrum Analysis Table
2.6.1 Spectrum Analysis Parameters
Figure 2-16: Air Interface Spectrum Analysis Page - SU/RB
Scan Period (sec) The period of staying on each channel during each cycle for
information gathering when performing spectrum analysis.
Range: 2-30 seconds.
Scan Cycles The number of scanning cycles when performing Spectrum Analysis.
Range: 1-100 cycles.
Automatic Channel
Selection
Applicable only for AU and BU. This option defines weather the
device will choose the best noise free channel upon startup after
completion of the spectrum analysis process. The selection is per
analysis: when the analysis is completed it will be disabled
automatically.
The option are Disable and Enable.
Current Status A read-only display of the current status of the spectrum analysis test.