User manual

Chapter 2 - Managing a Single Device/Cell Multiple Configuration Page (AU Only)
AlvariCRAFT Device Manager 191 User Manual
The Security screen includes the following parameters:
 Authentication Algorithm
 Data Encryption Option
 Security Mode
 Default Key
 Key # 1 to Key # 4
Refer to the “Security Parameters Page” on page 139 for more details on these
parameters.
2.30.3 Performing Multiple Configuration
1 Select the required screens (using the Open buttons) and make the required
configuration changes. After completing the configuration changes in each
screen, click OK to save the changes and return to the main screen. The check
box next to the name of a screen with configuration changes will be checked
automatically.
2 After completing all configuration changes verify that the check boxes next to
the required screens names are checked.
3 In the Equipment section, check the Select check boxes of all SUs that should
participate in the Multiple Configuration process.
4 Click Run. A Run dialog box will open, enabling you to save a log of the
process, run the process without saving a log, or cancel the Run request. If
you selected to save a log, a Save dialog box will open, enabling you to select
the location and file name for the log. The default log file name includes the
the current Date and Time, with the extension “.log”. After confirmation, the
operation’s Run log will be displayed. The Abort button enables you to cancel
an operation before completion. Close the Run log window to resume normal
operation of AlvariCRAFT.:
5 Click on the Log button to open the Log window for the last executed process.
To view a previous log, click on the Open button in the Log window and select
the required log. Close the Log window to resume normal operation of
AlvariCRAFT.
To view a log of a previously executed process: