User manual

Chapter 2 - Managing a Single Device/Cell Multiple Configuration Page (AU Only)
AlvariCRAFT Device Manager 182 User Manual
2.30.2.4 Air Interface - Frequency Parameters Screen
The Air Interface - Frequency Parameters screen includes the following
parameters:
 Frequency Band
 Frequencies Selection Table
In the Frequency Band drop down menu, select the required radio band. All
frequencies applicable to the selected radio band will be displayed in the table,
starting with the frequencies for the 10 MHz Sub Band and followed by the
frequencies for the 20 MHz Sub Band.
Note that the displayed frequencies may include frequencies that are not
supported by the specific Country Code used by the devices.
The default option for all Include entries is No Change. If you want to change the
setting for one or more frequencies, click on the Include entry for a selected
frequency and select the required option (No Change, Yes or No).
Refer to the “Air Interface Frequency Page” on page 46 for more details on these
parameters.
Figure 2-68: Multiple Configuration Page - Air Interface - Frequency Parameters Screen