User manual

Chapter 2 - Managing a Single Device/Cell Multiple Configuration Page (AU Only)
AlvariCRAFT Device Manager 177 User Manual
2.30 Multiple Configuration Page (AU Only)
The Multiple Configuration page enables simultaneous configuration changes in
all or selected SUs associated with the AU.
 Using Multiple Configuration Screens
 Multiple Configuration Screens
 Performing Multiple Configuration
2.30.1 Using Multiple Configuration Screens
Note that Multiple Configuration is a “write-only” operation.
Drop-down menus in Multiple Configuration screens include an empty (none)
option to enable a “No Change” selection.
Tables in Multiple Configuration screens enables either adding or removing
entries from the relevant tables in the managed devices:
Click on the Add button to add a line to the table, and click on the added line
(colored light blue) to define the value(s) of the entry. Click again on the Add
button to add another entry to the table. Select an entry and click on the Delete
button to remove it from the table.
Use the Action Table option to select between Insert (adding the values included
in the table on the screen to the tables in the managed devices) or Remove
(removing the values included in the table on the screen from the tables in the
managed devices).