User manual

Chapter 2 - Managing a Single Device/Cell Software Upgrade Page
AlvariCRAFT Device Manager 175 User Manual
In Software Upgrade for AU, different operations may be defined for the AU
and for SUs.
4 Click Run. A Run dialog box will open, enabling you to save a log of the
process, run the process without saving a log, or cancel the Run request. If
you selected to save a log, a Save dialog box will open, enabling you to select
the location and file name for the log. The default log file name includes the
the device’s IP address and the current Date and Time, with the extension
“.log”. After confirmation, the operation’s Run log will be displayed. The Abort
button enables you to cancel an operation before completion. Close the Run
log window to resume normal operation of AlvariCRAFT.
5 Click on the Log button to open the Log window for the last executed process.
To view a previous log, click on the Open button in the Log window and select
the required log. Close the Log window to resume normal operation of
AlvariCRAFT.
None No operation
Load to Shadow Load the specified Sw file to the shadow memory of the device.
Run from Shadow Load the specified Sw file to the shadow memory of the device Reset
the device and run from the shadow software version. Following the
next reset the unit will run again from the main version (previous
version).
Set as Main Load the specified Sw file to the shadow memory of the device Reset
the device and run from the shadow software version. Swap the
versions so that the new version will become the main version.
Following the next reset the unit will run from the new version.
To view a log of a previously executed process: