User manual

Chapter 2 - Managing a Single Device/Cell Unit Control Page
AlvariCRAFT Device Manager 165 User Manual
The Software Control section includes also the following buttons, enabling
management of the software versions:
Shadow Version Number A new software version loaded into the unit is defined as Shadow
Version.
Running Software
Version
The currently running software version.
Reset Click the button to reset the unit. After reset, the unit will run from its
main SW version. All changes to parameters that require reset that
were done prior to the reset operation are applied.
Run from Shadow Click the button to reset the unit and run from the shadow (backup)
software version. Following the next reset the unit will run again from
the main version.
Set as Main Applicable only when the unit is running from its shadow version.
Click to swap the versions: the currently running version will become
the main version, and the other one (previously the main version) will
become the shadow version.