User manual

Chapter 2 - Managing a Single Device/Cell Unit Control Page
AlvariCRAFT Device Manager 164 User Manual
The Unit Control page includes the following sections:
 General
 Software Control
 Configuration Control
2.26.1 General
2.26.2 Software Control
The Software Control section includes the following read-only parameters.
Unit Type A read-only display of the unit’s type.
For a BU/RB, you can change the unit type from BU to RB or vice
versa by clicking on the
Change Unit to RB/BU button.
Unit Name The name of the unit, which is also the system's name in the MIB2.
The name of the unit is also used as the prompt at the bottom of each
Monitor menu.
Valid values: A string of up to 32 printable characters.
Location The system location of the unit, which is also the sys location in MIB2.
The location is also displayed as a part of the Monitor menu's header.
Valid values: A string of up to 35 printable characters.
Feature License String This option enables entering a license string for upgrading the unit to
support new features and/or options.Each license string is associated
with a unique MAC Address and one feature/option. If the encrypted
MAC Address in the license string does not match the unit's MAC
Address, the string will be rejected. After applying the license string,
the unit must be reset for the change to take effect.
Telnet Logout Timer
(min)
The maximum period of inactivity time following which the unit
automatically exits the Monitor program.
The time out duration can range from 1 to 999 minutes.
Exit Telnet Click the button to disconnect any active Telnet session with the unit.
Main Version Number The software version that is defined as Main Version. This is the
version to be used after next reset.