User manual

Chapter 2 - Managing a Single Device/Cell Network Management Parameters Page
AlvariCRAFT Device Manager 161 User Manual
2.25.2 Network Management Parameters Page Send
Traps Tab (AU and BU Only)
The Traps Sending option enables or disables the sending of SNMP traps. When
enabled, traps will be sent only to destinations that are included in the Send
Traps To Table.
The Send Traps To table includes 10 entries. Each entry include the destination
address and the Read SNMP community to be used by this destination.
To modify an entry, double-click on the required cell and enter the new IP
Address and/or Community. A Community string comprises up to 8 printable
characters. To modify another entry, repeat the process. The color of previously
modified entries will turn blue.
To delete one or more entries from the list, select the relevant entries and click on
the Delete button. A deleted entry is displayed with IP Address 0.0.0.0 and
Community Public (the default).
To delete all entries, click on the Delete All button.
The Delete and Delete All operations are applied immediately. Other modifications
will be implemented in the managed device only after clicking on the Apply
button.
Figure 2-56: Network Management Parameters Page Send Traps Tab