User manual

Chapter 2 - Managing a Single Device/Cell Network Management Parameters Page
AlvariCRAFT Device Manager 160 User Manual
2.25.1.2 IP Addresses Ranges Table
A table of up to 10 IP address ranges. These are the addresses of devices that can
manage the unit if the Filtering option is enabled (in addition to addresses defined
in the IP Addresses table).
The Range/Subnet column enables selecting whether the entry is defined as a
Range (Start and End Addresses) or as a Subnet (Start Address and Net Mask).
Double-click on a Range/Subnet cell to open a drop-down menu that enables
selection between the two options.
To modify a range/subnet, define the desired Range/Subnet option, double-click
on the required cell and enter the new Start IP and/or the End IP /Net Mask. To
modify another range, repeat the process. The color of previously modified entries
will turn blue.
To delete one or more ranges from the list, select the relevant entries and click on
the Delete button. A deleted entry is displayed with IP Start and IP End of 0.0.0.0
(the default).
To delete all entries, click on the Delete All button.
The Delete and Delete All operations are applied immediately. Other modifications
will be implemented in the managed device only after clicking on the Apply
button.
2.25.1.3 IP Addresses Table
A table of up to 10 discrete IP addresses. These are addresses of devices that can
manage the unit if the Filtering option is enabled (in addition to addresses defined
in the IP Addresses Ranges table).
To modify an address, double-click on the required cell and enter the new IP
Address. To modify another entry, repeat the process. The color of previously
modified addresses will turn blue.
To delete one or more addresses from the list, select the relevant entries and click
on the Delete button. A deleted entry is displayed with IP Address of 0.0.0.0 (the
default).
To delete all entries, click on the Delete All button.
The Delete and Delete All operations are applied immediately. Other modifications
will be implemented in the managed device only after clicking on the Apply
button.