User manual

Chapter 2 - Managing a Single Device/Cell Network Management Parameters Page
AlvariCRAFT Device Manager 158 User Manual
The Network Management Parameters page General tab includes the following
sections:
Network Management General Parameters
IP Addresses Ranges Table
IP Addresses Table
2.25.1.1 Network Management General Parameters
Figure 2-55: Network Management Parameters Page General Tab - SU/RB
Access To Network
Management
The Access to Network Management option defines the port through
which the unit can be managed. The following options are available:
 From Wireless Link Only
 From Ethernet Only
 From Both Ethernet and Wireless Link
Be careful not to block your access to the unit. For example, if you
manage an SU or an RB via the wireless link, setting the Access to
Network Management parameter to From Ethernet Only completely
blocks your management access to the unit. In this case, a technician
may be required to change the settings at the user's site.