User manual

Chapter 2 - Managing a Single Device/Cell IP Parameters Page
AlvariCRAFT Device Manager 155 User Manual
2.24 IP Parameters Page
The IP Parameters page includes the following sections:
 IP settings
 Run-Time IP Parameters
 DHCP Settings
2.24.1 IP settings
The IP Setting section enables manually configuring the IP parameters (IP
Address, Subnet Mask, Default Gateway) of the unit. These settings are not
applicable when the unit is configured to acquire its IP parameters from a DHCP
server (see Section 2.24.3)
2.24.2 Run-Time IP Parameters
The Run-Time IP Parameters display (read-only) the actual IP parameters (IP
Address, Subnet Mask, Default Gateway) of the unit. When these parameters are
acquired from a DHCP server, they may differ from the manually configured
parameters in the IP Settings section.
Figure 2-53: IP Parameters Page