User manual

Chapter 2 - Managing a Single Device/Cell Service Parameters Page
AlvariCRAFT Device Manager 136 User Manual
The Service Parameters Page WLP (Wireless Link Prioritization) tab includes the
following sections:
 General WLP Parameters
 AU Burst Parameters/BU Burst Parameters
 SU Burst Parameters/RB Burst Parameters
2.20.4.1 General WLP Parameters
Figure 2-48: Service Parameters Page WLP Tab
Wireless Link
Prioritization Option
This parameter enables or disables the Wireless Link Prioritization
feature.
Low Priority AIFS The Low Priority AIFS defines the AIFS number of time slots that will
be used by the AU/BU and the SUs/RB served by it for low priority
traffic.
The range is from 3 to 50 (time slots).
High Priority HW Retries This parameter defines the maximum number of times that an
unacknowledged high priority unicast packet can be retransmitted.
This is the value that will be used by the AU/BU and by the SUs/RB
served with it.
The range is from 1 to 14 times.