User manual

Chapter 2 - Managing a Single Device/Cell Service Parameters Page
AlvariCRAFT Device Manager 120 User Manual
The Service Parameters Page General tab includes the following sections:
User Filtering (SU and RB Only)
MIR/CIR in BreezeACCESS
MIR/CIR in BreezeNET B
2.20.1.1 User Filtering (SU and RB Only)
The User Filtering section includes the following components:
Figure 2-45: Service Parameters Page General Tab - BU
User Filtering Option The User Filtering Option disables or enables the User Filtering
feature. The following options are available:
Disable - no filtering.
IP Only - only IP Protocol packets pass.
User Defined Address Only - only IP frames from/to IP addresses
included in the Filter IP Address Ranges table pass.
PPPoE Only - only PPPoE messages pass (Ethernet type 0x8863
and 0x8864).