User manual

Chapter 2 - Managing a Single Device/Cell Bridging Page
AlvariCRAFT Device Manager 110 User Manual
Management VLAN
Priority
The Management VLAN Priority enables defining the value of the
VLAN Priority field for management frames in units with Management
VLAN ID that is other than 65,535 (none). This parameter only
impacts the way other VLAN aware devices handle the packet.
Valid values range from 0 to 7.
Forwarding Support The VLAN Forwarding Support feature is applicable only for Trunk
Links and Service Provider Links. If the Link Type is defined as either
a Trunk Link or a Service Provider Link and the VLAN Forwarding
Support is enabled, a data frame received with a VLAN ID (or a
Service Provider VLAN ID) that is not included in the unit's VLAN
Forwarding Table is discarded.
Forwarding Table A table that can include up to 20 VLAN IDs. To add a VLAN ID,
double-click on a VLAN ID cell with a zero (0) value, and enter the
required value (1-4094). To remove a VLAN ID from the table, double
click on the relevant cell and delete its contents (or enter 0). To
replace a VLAN ID, double-click on the relevant cell and enter the
new value.
If the VLAN Forwarding Table is empty and the VLAN Forwarding
Support is set to Enable, then all data frames are discarded. In an
AU, If VLAN Relaying Support and VLAN Forwarding Support are
both enabled, then all VLAN IDs in the Relaying Table must also be
included in the Forwarding Table.
Extended Access Table Applicable only for SU. The table allows users to define up to 8
different rules for applying VLAN and priority tags on Ethernet to
WLAN traffic. Different rules may apply the same VLAN ID.