User manual

Chapter 2 - Managing a Single Device/Cell Site Survey Per SU Counters Page (AU) / Per RB Counters Page (BU)
AlvariCRAFT Device Manager 93 User Manual
The selected unit’s MAC Address is displayed above the counters table.
The information displayed for the selected unit includes the following:
The page includes also the following components:
Max Mod. Level The Maximum Modulation Level configured in the unit.
Tx Frames Total The total number of unicast frames (excluding retransmissions)
successfully transmitted to the unit.
Total Dropped The number of dropped frames intended for the unit, which were
unsuccessfully retransmitted without being acknowledged until the
maximum permitted number of retransmissions.
Level N Success (N=1-8) The total number of unicasts successfully transmitted to the unit at the
applicable modulation level.
Level N Failed (N=1-8) The total number of failures to successfully transmit unicast frame to
the unit during a HW Retry cycle at the applicable modulation level.
Polling Interval (sec) and
Apply button
The refresh interval for the displayed counters. Enter the required
polling interval and click on the Apply button to update it.
The range is 5 to 3600 seconds. The default is 5 seconds.
Reset Counters button Click on the button to reset all Per SU/RB counters.