Specifications

Chapter 4 - Operation and Administration Menus and Parameters
BreezeACCESS 4900 71 System Manual
 FTP Software Download Parameters: The parameters for SW download using
FTP, as defined in Unit Control menu.
» FTP SW Version File Name
» FTP Source Directory
 Configuration File Download/Upload Parameters: The parameters for
Configuration file upload/download using FTP, as defined in the Unit Control
menu.
» Configuration File Name
» Configuration File Source Directory
» Operator Defaults File Name
 FTP Log File Upload Parameters: The parameters for Event Log file upload
using FTP, as defined in the Unit Control menu.
» FTP Log File Name
» FTP Log File Destination Directory
 Event Log Minimum Severity
 ATE Test Status: Indicates the result of the unit's final testing in production.
In units supplied with SW version 4.5 and higher should always be PASS. In
units upgraded from a version below 4.5 this parameter will be NONE.
 Serial Number: The Serial Number of the unit. Applicable only to units
supplied with SW version 4.5 and higher. In units upgraded from a version
below 4.5 this parameter will be none (empty).
 SU-54 Support (AUS only): Supported or Not Supported. Indicates whether
the AUS can support SU-54 units (support of SU-54 units by AUS is a licensed
feature available for all AUS units).
 Wireless Link Prioritization Support (AU only): Supported or Not
Supported. Indicates whether the unit supports the Wireless Link
Prioritization feature (Wireless Link Prioritization is a licensed feature).