Specifications

Chapter 4 - Operation and Administration Menus and Parameters
BreezeACCESS 4900 68 System Manual
The Info Screens menu includes the following options:
 Show Unit Status
 Show Basic Configuration
 Show Advanced Configuration
 Show Country Dependent Parameters
 Show All Parameters
4.2.2.1 Show Unit Status
The Show Unit Status menu is a read only menu that displays the current values
of the following parameters:
 Unit Name: As defined in the Unit Control menu.
 Unit Type: Identifies the unit's function.
 Unit MAC Address: The unit's unique IEEE MAC address.
 Current Number of Associations (AU only): The total number of SUs
associated with this AU. This number may include units that are not currently
active or associated.
 Number of Associations Since Last Reset: For SUs - displays the total
number of associations with any AU since the last reset, including duplicate
associations with the same AU. For AUs - displays the number of SUs that
NOTE
An SU is only removed from the list of associated SUs under the following conditions:
 The SU failed to respond to 100 consecutive data frames transmitted by the AU and is
considered to have "aged out".
 During the last 6 minutes (or more) the SU did not transmit any data frame, and failed to
respond to certain frames that typically are transmitted by the AU every 10 seconds. Since the
sampling interval for this state is about 10 minutes, it means that the decision to remove the SU
from the Associations Database will take place between 6 to 16 minutes from the time the SU
ceased sending data or responding to these "keep-alive" frames (for AUS the sampling interval
is 1 minute, meaning decision time of 6 to 7 minutes).