Specifications

Chapter 4 - Operation and Administration Working with the Monitor Program
BreezeACCESS 4900 66 System Manual
4.1.2 Common Operations
The following describes the standard operations used when working with the
Monitor program.
 Type an option number to open or activate the option. In certain cases you
may need to press Enter.
 Press Esc to exit a menu or option.
In some cases, to activate any configuration changes, you must reset the unit.
Certain settings are automatically activated without having to reset the unit. Refer
to Appendix E for information on which parameters are run time configurable,
which means that the unit need not be reset for the parameter to take effect, and
which parameters do require that the unit be reset.
NOTE
The program is automatically terminated following a determined period of inactivity. The default time
out is 5 minutes and is configured with the Log Out Timer parameter.