Specifications

Chapter 3 - Commissioning Operation Verification
BreezeACCESS 4900 61 System Manual
3.4.3 Verifying the Ethernet Connection (Modular
Base station)
After connecting the unit to an Ethernet outlet, verify that the Ethernet Integrity
Indicator, which is the yellow LED embedded in the 10/100 BaseT connector, is
on. This indicates that the unit is connected to an Ethernet segment. The
Ethernet Activity Indicator, which is the green embedded LED, should blink
whenever the unit receives or transmits traffic on the 10/100 BaseT port.
3.4.4 Verifying the Indoor-to-Outdoor Connection
(Modular Base Station)
After connecting the unit to an Ethernet outlet, verify that the Ethernet Integrity
Indicator, which is the yellow LED embedded in the RADIO connector, is on. This
indicates that the unit has detected an Ethernet link connection. The Ethernet
Activity Indicator, which is the green embedded LED, should blink whenever the
unit receives or transmits traffic on the RADIO port.
3.4.5 Verifying Data Connectivity
To verify data connectivity, from the end-user's PC or from a portable PC
connected to the unit, ping the Access Unit, or try to connect to the Internet.
Table 3-8: PS1073 SU IDU / AU-SA IDU LEDs
Name Description Functionality
POWER Power Indication
 Green - IDU power is OK
 Off - No power or power failure
ETH Self test and end-to-end
Ethernet connectivity
 Off - No Ethernet connectivity has been detected between
the outdoor unit and the device connected to the indoor
unit.
 Green - Self-test passed and Ethernet connection
confirmed by the outdoor unit (Ethernet integrity check
passed).