Specifications

Chapter 2 - Installation Installing the Outdoor Unit
BreezeACCESS 4900 39 System Manual
2.3.4.2 Units with a Waterproof Seal Supplied with the Ethernet
Cable
1 Verify that the o-ring supplied with the cable kit is in place.
2 Connect the RJ-45 connector of the Ethernet cable to the outdoor unit.
3 Attach the waterproof seal to the unit. Tighten the top nut.
4 Route the cable to the location selected for the indoor equipment.
5 Assemble an RJ-45 connector with a protective cover on the indoor end of the
indoor-to-outdoor cable.
See Appendix D for instructions on preparing the cable.
To connect the indoor-to-outdoor cable: