Specifications

Chapter 2 - Installation Installing the Outdoor Unit
BreezeACCESS 4900 35 System Manual
2.3.1.1 Pole Mounting the ODU Using the Clamps
Figure 2-2 illustrates the method of mounting an outdoor unit on a pole, using
the clamps and threaded rods.
Figure 2-3:
2.3.1.2 Pole Mounting the ODU with the Tilt Accessory
Figure 2-2: 3" Pole Installation Using Special Clamps
NOTE
There is a groove on one end of the threaded rod. Be sure to insert the threaded rods with the
grooves pointing outward, and fasten them to the unit using a screwdriver. Install the unit with the
bottom pannel, which includes the connectors, facing downward.
To mount the ODU on a pole using the Tilt accessory: