Specifications

Chapter 2 - Installation Installation Requirements
BreezeACCESS 4900 29 System Manual
 A Y-cable for connecting directly to the IDU COM of ODUs with a new (smaller
size) enclosure for configuration/performance monitoring using a portable PC.
2.1.1.5 Additional Installation Requirements
The following items are also required to install the BreezeACCESS 4900 system
components:
 Indoor-to-outdoor Category 5E Ethernet cable with shielded RJ-45 connectors
* (available in different lengths. For more details refer to Section 2.1.2)
 Ethernet cable (straight for connecting to a hub/switch etc., crossed for
connecting directly to a PC's NIC)
 Crimping tool for RJ-45 connectors
 Antenna (for E model units supplied without an antenna) and RF cable.
 Ground cables with an appropriate termination
 Mains plug adapter or termination plug (if the power plug on the supplied AC
power cord does not fit local power outlets)
 Portable PC with Ethernet card and Telnet software or AlvariCRAFT for
BreezeACCESS 4900* application and a crossed Ethernet cable
 Installation tools and materials, including appropriate means (e.g. a pole) for
installing the outdoor unit.
2.1.2 Indoor-to-Outdoor Cables
NOTE
Items marked with an asterisk (*) are available from Alvarion.
NOTE
The length of the indoor-to-outdoor Ethernet cable should not exceed 90 meters. The length of the
Ethernet cable connecting the indoor unit to the user's equipment, together with the length of the
Indoor-to-Outdoor cable, should not exceed 100 meters.