Specifications

Chapter 2 - Installation Installation Requirements
BreezeACCESS 4900 26 System Manual
2.1 Installation Requirements
This section describes all the supplies required to install the BreezeACCESS 4900
system components and the items included in each installation package.
2.1.1 Packing List
2.1.1.1 Subscriber Unit
The SU installation kit includes the following components:
 IDU indoor unit with a wall mounting kit
 Mains power cord
 Any of the following outdoor units:
» SU-A-ODU outdoor unit with an integrated vertically polarized antenna
OR
» SU-E-ODU outdoor unit with a connection to an external antenna
Table 2-1: Subscriber Unit ODU Types
SU ODU Type Description
SU-A-ODU A rectangular enclosure plus a diamond shaped vertically polarized
high-gain flat antenna integrated on the front panel (41.5 x 36.9 x 6.3 cm).
HW revision D or lower.
New SU-A-ODU A diamond shaped enclosure (22 x 22 x 7 cm) with a vertically/horizontally
polarized high-gain flat antenna integrated on the front panel.
The smaller size new SU-A-ODU (HW revision E) is currently available only
in the 5.4 GHz and 5.8 GHz bands.
SU-E-ODU A rectangular enclosure (30.5 x 11.7 x 5.7 cm) with a connection to an
external antenna (antenna and cable not included). HW revision D or lower.
New SU-E-ODU A diamond shaped enclosure (22 x 22 x 7 cm) with a connection to an
external antenna (antenna and cable not included).