Specifications

Chapter 4 - Operation and Administration Menus and Parameters
BreezeACCESS 4900 197 System Manual
4.2.6.8 Country Code Parameters
4.2.6.8.1 Select Country Code
The Country Code Select option enables changing the Country Code used by the
unit.
The default Country Code is set in factory according to the destination country.
4.2.6.8.2 Re-apply Country Code Values
After loading a new SW version with any changes in the relevant Country Code,
the Re-apply Country Code Values option must be activated for the changes to
take effect. Following activation of this feature, the unit must be reset to fully
apply the changes.
NOTE
Do not leave the AU in the enabled Promiscuous Authentication mode for prolonged periods. Use it
only when absolutely necessary, perform the required actions as quickly as possible and disable it.
The unit will return automatically to Promiscuous Authentication disabled mode after reset.
CAUTION
The selected Country Code must comply with applicable local radio regulations.