Specifications

Chapter 4 - Operation and Administration Menus and Parameters
BreezeACCESS 4900 176 System Manual
4.2.6.6 Service Parameters
The Service Parameters menu enables defining user filtering, MIR/CIR
parameters, traffic prioritization parameters and DRAP parameters.
The Service Parameters menu includes the following options:
 User Filtering Parameters (SU only)
 MIR and CIR Parameters
 Traffic Prioritization
 DRAP Parameters (AU only)
4.2.6.6.1 User Filtering Parameters (SU only)
The User Filtering Parameters submenu enables defining the IP addresses of user
devices authorized to access the wireless medium for security and/or control
purposes. In addition, it can be used to enable the transmission and reception of
specific protocol frames. These filtering options do not affect management frames
sent to or generated by the unit.
The User Filtering Parameters menu provides the following options:
4.2.6.6.1.1 User Filtering Option
The User Filtering Option disables or enables the User Filtering feature. The
following options are available:
 Disable - no filtering.
 IP Protocol Only - only IP Protocol packets pass.
 User Defined Addresses Only - only IP frames from/to IP addresses included
in the User Filter Addresses list pass.
 PPPoE Protocol Only - only PPPoE messages pass (Ethernet type 0x8863 and
0x8864).
The default selection is Disable.
4.2.6.6.1.2 Set/Change Filter IP Address Range
The Set/Change Filter IP Address Ranges option enables defining/updating up to
8 IP address ranges to/from which IP frames are to pass if the User Defined
Addresses Only option is selected in the User Filtering Option parameter.