Specifications
Chapter 4 - Operation and Administration Menus and Parameters
BreezeACCESS 4900 161 System Manual
link are transmitted by the AU back to the wireless link devices, as well as to the
wired LAN.
The default selection is Broadcast/Multicast Enable.
4.2.6.4.6 Unicast Relaying (AU only)
The Unicast Relaying option enables selecting whether the unit performs unicast
relaying. When the Unicast Relaying parameter is enabled, unicast packets
originating from devices on the wireless link can be transmitted back to the
wireless link devices. If disabled, these packets are not sent to the wireless link
even if they are intended for devices on the wireless link. Disable the Unicast
Relaying parameter only if all unicast messages from the wireless link are certain
to be directed to the local wired LAN.
The default selection is Enable.
4.2.6.4.7 MAC Address List (AU only)
The MAC Address List submenu enables to define a list of up to 100 MAC
addresses as belonging to devices that are either granted or denied service. When
the list is defined as a Deny List, the AU will not provide services to a unit whose
MAC address is included in the list, enabling to disconnect units in cases such as
when the user had fraudulently succeeded to configure the unit to values different
from the subscription plan. When the list is defined as an Allow List, the AU will
provide services only to units with a MAC address that is included in the list.
In addition, the Station Allowed Option enables defining whether an SU with any
MAC address can try to associate with the AU, or only SUs with a MAC address
starting with 00-10-E7 (the supplier's MAC addresses range).
The MAC Address List submenu includes the following:
4.2.6.4.7.1 Add MAC Address to List
Select Add MAC Address to List to add a MAC Address to the List.
4.2.6.4.7.2 Remove MAC Address from List
Select Remove MAC Address from List to remove a MAC Address from the List.
4.2.6.4.7.3 MAC Address List Action
This parameter defines the working mode of the MAC list:
In the case of an Allowed list, if the MAC address is included in the list, the SU
will be able to associate itself with the AU and receive permission for
generating traffic; if it is not found in the list, it will still be associated but
without the permission to generate traffic.