Specifications

Chapter 4 - Operation and Administration Menus and Parameters
BreezeACCESS 4900 155 System Manual
VLAN ID Defines the VLAN ID tag that is going to be applied to untagged
frames in the Ethernet to WLAN traffic. Also, any incoming WLAN
traffic tagged with this ID will be routed to Ethernet untagged. This
parameter must be configured in order to save the rule.
Valid values range from 1 to 4094.
If no value is defined for this entry, 0 is returned.
VLAN Priority Defines the priority tag that is going to be applied to untagged
frames in the Ethernet to WLAN traffic. This parameter must be
configured in order to save the rule.
Valid values range from 0 to 7.
If no value is defined for this entry, 255 is returned.
VLAN Multicast Allowed Defines whether multicast frames are filtered when applying the rule.
The available options are:
 0 - Multicast frames not allowed
 1 - Multicast frames allowed
The default value is 0.
This setting applies only to Layer 2 multicast frames. It does not
apply to Layer 2 broadcast frames or to Layer 3 broadcast or
multicast frames. For more information on this topic, see
Table 4-15.
VLAN Rule Data Type Defines the type of data that is defined in the VLAN Rule Data field.
The available options are:
 1 - Value - A single value is entered
 2 - Range - A range of consecutive values is entered by typing
the first and the last value in the range separated by a space or
by a minus symbol (-).
 3 - Mask - An address - mask pair of entries is typed separated
by a space or comma symbol (,). The subnet defined in this
manner will be the applicable domain for the rule.
 4 - Enum - A set of values is typed separated by comma
symbols (,).
The default setting is Value.
Table 4-14: VLAN Rule # Parameters
Parameter Description