Specifications

Chapter 4 - Operation and Administration Menus and Parameters
BreezeACCESS 4900 153 System Manual
 VLAN Priority - Management
4.2.6.4.1.7.1 VLAN Priority - Data (SU only)
The VLAN Priority - Data is applicable for Access Links only. It enables configuring
the value of the VLAN Priority field for data frames transmitted to the wireless
link. All data frames are routed to the Low queue. This parameter only impacts
the way other VLAN aware devices handle the packet.
Valid values range from 0 to 7.
The default value is 0.
4.2.6.4.1.7.2 VLAN Priority - Management
The VLAN Priority - Management enables defining the value of the VLAN Priority
field for management frames in units with VLAN ID-Management that is other
than 65535. All management frames are routed to the High queue. This
parameter only impacts the way other VLAN aware devices handle the packet.
Valid values range from 0 to 7.
The default value is 4 for SUs and 0 for AUs.
4.2.6.4.1.8 VLAN QinQ Protocol Ethertype (Hex)
The VLAN QinQ Protocol Ethertype parameter sets the Ethertype of the Service
Provider tag, and is applicable only for Service Provider Links.
The valid values are from 8100 to 9000, 9100 and 9200 (Hex).
The default value is 8100 (Hex).
4.2.6.4.1.9 VLAN Extended Access (SU only)
The VLAN Extended Access menu allows users to define up to 8 different rules for
applying VLAN and priority tags on Ethernet to WLAN traffic. Different rules may
apply the same VLAN ID.
4.2.6.4.1.9.1 VLAN Rule #
Each rule comprises the following parameters: