Specifications

Chapter 4 - Operation and Administration Menus and Parameters
BreezeACCESS 4900 143 System Manual
4.2.6.4.1.1 VLAN ID - Data (SU only)
The VLAN ID-Data is applicable only when the VLAN Link Type parameter is set to
Access Link. It enables defining the VLAN ID for data frames, which identifies the
VLAN to which the unit belongs.
Valid values range from 1 to 4094.
Default value: 1.
The VLAN ID-Data affects frames received from the wireless link port, as follows:
 Only tagged frames with a VLAN ID (VID) equal to the VLAN ID - Data defined
in the unit are forwarded to the Ethernet port.
 The tag headers are removed from the data frames received from the wireless
link before they are transmitted on the Ethernet port.
The VLAN ID - Data affects frames received from the Ethernet port, as follows:
 A VLAN Data Tag is inserted in all untagged frames received from the Ethernet
port before transmission on the wireless link. The tag includes the values of
the VLAN ID - Data and the VLAN Priority - Data parameters.
 Tagged frames received on Ethernet port, which are meant to be forwarded to
the wireless link port, are discarded. This includes frames with tagging for
prioritization purposes only.
4.2.6.4.1.2 VLAN ID-Management
The VLAN ID-Management is applicable for all link types. It enables defining the
VLAN ID for management frames, which identifies remote stations for
management purposes. This applies to all management applications using
protocols such as SNMP, TFTP, ICMP (ping), DHCP and Telnet. All
servers/stations using these protocols must tag the management frames sent to
the unit with the value of the VLAN ID - Management parameter.
Valid values: 1 to 4094 or 65535 (No VLAN).
The default value is 65535.
If the VLAN ID-Management is other than 65535:
 Only single-tagged management frames with a matching VLAN ID, or
double-tagged management frames with a matching Service Provider VLAN ID
received on either the Ethernet or wireless link ports are forwarded to the unit.