Specifications

Chapter 4 - Operation and Administration Menus and Parameters
BreezeACCESS 4900 141 System Manual
4.2.6.3.7.3 SNMP Traps Community
The SNMP Traps Community option enables defining the Community name for
each IP address to which SNMP Trap messages are to be sent.
Valid strings: Up to 8 ASCII characters.
The default for all 10 addresses is "public", which is the default Read community.
4.2.6.3.7.4 Delete One Trap Address
The Delete One Trap Address option enables deleting Trap address entries from
the SNMP Traps Addresses list.
4.2.6.3.7.5 Delete All Trap Addresses
The Delete All Trap Addresses option enables deleting all entries from the SNMP
Traps Addresses list.
4.2.6.3.8 Wi2 IP Address (SU Only)
The BreezeACCESS WI
2
system comprises a self-contained combination of an
advanced WiFi Access Point and a BreezeACCESS SU-ODU that provides
backhaul connectivity. The Wi2 IP Address parameter enables the installer to
configure in the SU the IP address of the WiFi AP connected to it, providing
availability of the IP address information for remote management of the AP.
The default Wi2 IP Address is 0.0.0.0 (meaning none).
4.2.6.4 Bridge Parameters
The Bridge Parameters menu provides a series of parameter sets that enables
configuring parameters such as control and filtering options for broadcast
transmissions, VLAN support, and Type of Service prioritization.
The Bridge Parameters menu includes the following options:
 VLAN Support
 Ethernet Broadcast Filtering (SU only)
 Ethernet Broadcast/Multicast Limiter
 Bridge Aging Time
 Roaming Option (SU only)
 Broadcast/Multicast Relaying (AU only)