Specifications
Chapter 4 - Operation and Administration Menus and Parameters
BreezeACCESS 4900 139 System Manual
Activate IP Filter on Wireless Link Port: Applicable only if the Access to
Network Management parameter is configured to either From Wireless Link
Only or From Both Ethernet and Wireless Link. The unit can be managed from
the wireless port only by stations with IP addresses matching one of the
entries in the Set Network Management IP Addresses parameter. If the Access
to Network Management parameter is configured to From Both Ethernet and
Wireless Link then no IP address based filtering is configured for the Ethernet
port.
Activate IP filter on Both Ethernet and Wireless Link Ports: Applicable to
all options of the Access to Network Management parameter. The unit can be
managed from the port(s) defined by the Access to Network Management
parameter only by stations with IP addresses matching one of the entries in
the Set Network Management IP Addresses parameter.
The default selection is Disable.
4.2.6.3.3 Set Network Management IP Address
The Set Network Management IP Address option enables defining up to 10 IP
addresses of devices that can manage the unit if the Network Management
Filtering option is enabled.
The default Network Management IP Address is 0.0.0.0 (all 10 addresses).
4.2.6.3.4 Delete a Network Management IP Address
The Delete Network Management IP Address option enables deleting IP address
entries from the Network Management IP Addresses list.
4.2.6.3.5 Delete All Network Management IP Addresses
The Delete All Network Management IP Addresses option enables deleting all
entries from the Network Management IP Addresses list.
4.2.6.3.6 Set/Change Network Management IP Address Ranges
The Set/Change Network Management IP address Ranges menu enables defining,
updating or deleting IP address ranges from which the unit can be managed if the
Network Management Filtering option is enabled. This is in addition to the
previous options in the Network Management menu that enable defining,
updating and deleting discrete IP addresses.
The menu includes the following options: