Specifications

Chapter 4 - Operation and Administration Menus and Parameters
BreezeACCESS 4900 114 System Manual
4.2.6.2.1.3 Hidden ESSID Option (AU only)
The Hidden ESSID Option enables or disables the Hidden ESSID feature. When
enabled, the ESSID will not be broadcasted by the AU.
The default is Disable.
4.2.6.2.1.4 Hidden ESSID (SU only)
The Hidden ESSID submenu in the SU includes the following options:
4.2.6.2.1.4.1 Hidden ESSID Support
The Hidden ESSID Support option enables or disables the Hidden ESSID feature
in the SU.
The default is Disable.
4.2.6.2.1.4.2 Hidden ESSID Timeout
The Hidden ESSID Timeout parameter defines the time that SU will not try again
to associate with an AU that is working with Hidden ESSID if the AU rejected
Association Request sent by the SU because of wrong ESSID.
The range is from 1 to 60 minutes.
The default is 10 minutes.
4.2.6.2.1.4.3 Show Hidden ESSID Parameters
Select this option to view the current values of Hidden ESSID Support and Hidden
ESSID Timeout.
4.2.6.2.2 Frequency Definition Parameters
4.2.6.2.2.1 Sub-Bands and Frequency Selection
Each unit is delivered with one or more pre-configured Sub-Bands, according to
the country code. These sets of parameters include also the frequencies that can
be used and the bandwidth.
The parameters that determine the frequency to be used are set in the AU. If more
than one Sub-Band is available, the sub-band to be used can be selected. If only
one Sub-Band is supported, then the sub-band selection option is not available.
The SU should be configured with a minimal set of parameters to ensure that it
will be able to automatically detect and use the frequency/bandwidth used by the
AU, including possible changes in this frequency (Automatic Sub Band Select
feature).
To simplify the installation process the SU scans a definable frequencies subset
after power-up. The defined frequencies subsets may include frequencies from
more than one Sub-Band, enabling automatic detection of both frequency and
bandwidth. If the Best AU feature is enabled, the SU will scan the defined subset