Specifications

Chapter 4 - Operation and Administration Menus and Parameters
BreezeACCESS 4900 108 System Manual
 ATPC Option: Enable or Disable.
 Adaptive Modulation Option: Enable or Disable.
 Burst Mode Option: Enable or Disable.
 DFS Option: Enable or Disable. On SUs, this parameter displays the current
option in the relevant AU. On AUs, it displays the DFS values configured in
each SU.
 Concatenation Option: Enable or Disable.
 Country Code Learning by SU: Enable or Disable. This parameter is available
only in SUs, displaying the current option in the relevant AU.
 Per SU Distance Learning: Enable or Disable. This parameter is available
only in SUs, displaying the current option in the relevant AU.
4.2.5.8.3 Show Link Capability-Security Configuration
Select this option to view information on current security related parameters of
relevant units. For each relevant unit, identified by its MAC address, the following
details are displayed:
 Security Mode: WEP, AES OCB or FIPS 197.
 Authentication Algorithm: Shared Key or Open System.
 Data Encryption Option: Enable or Disable.
4.2.5.8.4 Show Link Capability by AU (SU only)
Select this option to view all capabilities information (General, wireless Link
Configuration, Security Configuration) of a selected AU (by its MAC address).
4.2.5.8.5 Show Link Capability by SU (AU only)
Select this option to view all capabilities information (General, Wireless Link
Configuration, Security Configuration) of a selected SU (by its MAC address).
4.2.6 Advanced Configuration Menu
The Advanced Configuration menu provides access to all parameters, including
the parameters available through the Basic Configuration menu.
The Advanced Configuration menu enables accessing the following menus: