Specifications

Chapter 4 - Operation and Administration Menus and Parameters
BreezeACCESS 4900 85 System Manual
 FTP Password: The FTP Password option enables defining the password to be
used for accessing the FTP server that is hosting the SW Version file.
Valid values: A string of up to 18 printable ASCII characters.
The default is: vx
 Show SW Version Download Parameters and Status: Displays the current
values of the SW Version Download parameters, the current SW version and
the SW versions stored in the Flash memory.
4.2.3.12 Configuration File Upload/Download
The Configuration File Upload/Download submenu enables the optional
uploading or downloading of a configuration or an Operator Defaults file from a
remote FTP server. The Configuration File Upload/Download submenu includes
the following options:
 Execute FTP GET/PUT Configuration File: The Execute FTP GET/PUT
Configuration File executes the upload/download of a Configuration file or an
Operator Defaults file according to the parameters defined below. The
following options are available:
» Execute FTP Get Configuration File (cfg)
» Execute FTP Put Configuration File (cfg)
» Execute FTP Get Operator Defaults File (cmr)
» Execute FTP Put Operator Defaults File (cmr)
NOTE
There is one set of general FTP parameters (FTP Server IP Address, FTP Gateway IP Address,
FTP User Name and FTP Password). This set (or relevant parts of the set) serves the SW
Download Procedure, the Configuration File Upload/Download procedure and the Event Log File
Upload procedure. Changing any of these parameters in the menu for any procedure will
automatically change its value in the menu for the other procedures.