Specifications

Chapter 4 - Operation and Administration Menus and Parameters
BreezeACCESS 4900 83 System Manual
 FTP Password: The FTP Password option enables defining the password to be
used for accessing the FTP server that is hosting the file.
Valid values: A string of up to 18 printable ASCII characters.
The default is: vx
 Show FTP Event Log File Upload Parameters: Displays the current values of
the Event Log Upload parameters.
4.2.3.10 Feature Upgrade
The Feature Upgrade option enables to enter a license string for upgrading the
unit to support new features and/or options. Upon selecting the Manual Feature
Upgrade option the user will be requested to enter the license string. Each license
string is associated with a unique MAC Address and one feature/option. If the
encrypted MAC Address in the license string does not match the unit's MAC
Address, the string will be rejected. If there is a match, a message notifying of the
new feature/option will be displayed. The unit must be reset for the change to
take effect.
The license string comprises 32 to 64 hexadecimal digits.
New Feature License files can be uploaded remotely using TFTP (see Appendix B).
NOTE
There is one set of general FTP parameters (FTP Server IP Address, FTP Gateway IP Address,
FTP User Name and FTP Password). This set (or relevant parts of the set) serves the SW
Download procedure, the Configuration File Upload/Download procedure and the Event Log File
Upload procedure. Changing any of these parameters in the menu for either procedure will
automatically change its value in the menu for the other procedures.
NOTE
If you are entering the license string using copy and paste operation, check carefully that the string
is copied properly. You may have to enter it manually due to potential problems in performing copy
and paste in Telnet.