User manual

Unit Configuration
BreezeCONFIG for BreezeACCESS VL and BreezeACCES 4900 User Manual
66
 Limiter Threshold: The Limiter Threshold defines the maximum number of
packets per second that will pass the limiter when it is enabled.
The range is from 0 to 204800 (packets/second).
 Send Trap Interval: The Send Trap Interval defines the minimum time in
minutes between two consecutive transmissions of the trap indicating the
number of packets that were dropped by the limiter since the previous trap (or
since the time that the limit has been exceeded).
The range is from 1 to 60 minutes.
2.7.1.3 Bridging Settings (AU only)
 Broadcast/Multicast Relaying: The Broadcast/Multicast Relaying option
enables selecting whether the unit performs relaying of broadcasts and/or
multicasts. The available options are:
 Disable
 Enable B/M (enable relaying of broadcasts and multicasts)
 Enable B (enable only relaying of broadcasts)
 Enable M (enable only relaying of multicasts)
If broadcast/multicast relaying if disabled, these packets are sent only to the
local wired LAN and are not sent back to the wireless link. When broadcast
and or multicast relaying is enabled, the relevant packets (broadcasts only,
multicasts only or both broadcasts and multicasts) originating from devices
on the wireless link are transmitted by the AU back to the wireless link
devices, as well as to the wired LAN.
 Unicast Relaying: From the dropdown list, select whether to Enable or
Disable the unicast relaying mechanism. If enabled, unicast packets
originating from devices on the wireless link can be transmitted by the AU
back to the wireless link devices. If disabled, these packets are not sent back
to the wireless link even if they are intended for devices on the wireless link
side.