User manual

Unit Configuration
BreezeCONFIG for BreezeACCESS VL and BreezeACCES 4900 User Manual
62
2.6.2 Network Management Send Traps Tab
The Network Management Send Traps tab enables you to define up to 10 stations
that are to receive SNMP trap messages from the unit.
Figure 2-20: Network Management Send Traps Tab
The Send Traps tab is comprised of the following components:
 Trap Sending: From the dropdown list, select to Enable or Disable the
sending of trap messages from the unit.
 Send Traps to: To define a station that is to receive trap messages from the
selected unit, select a row in the IP Address column and enter the station's IP
address. Then, select the adjoining field in the Community column and enter
the required community string.
 Delete Traps Destination: From the dropdown list, select an entry to be
deleted from the Send Traps to table. The options in the dropdown list relate
to the row of the table in which the required IP address is listed.
 Delete All Traps Destinations: Mark the check box to delete all the entries
from the Send Traps to table.
 My IP Address is: Displays the IP address of the management station from
which you are currently accessing the selected unit.