User manual

Network Management Parameters
BreezeCONFIG for BreezeACCESS VL and BreezeACCES 4900 User Manual
59
2.6 Network Management Parameters
The Network Management tab enables you to protect the unit from unauthorized
access by defining a set of IP addresses from which the unit can be managed
using protocols such as Telnet, TFTP, SNMP, DHCP or ICMP. This excludes
messages generated in the unit, such as SNMP traps or Ping test frames. In
addition, you can select from which direction management access is permitted,
from the wireless medium, the wired Ethernet, or both.
The Network Management tab also enables you to define the management
stations to which trap messages are to be sent and to manage the event log.
The Network Management tab is divided into two secondary tabs, General and
Send Traps.
2.6.1 Network Management General Tab
The General tab of the Network Management tab enables you to define
management-filtering options.
Figure 2-19: Network Management General Tab (SU)
The General network management tab is comprised of the following components: