User manual

Best AU Parameters (SU only)
BreezeCONFIG for BreezeACCESS VL and BreezeACCES 4900 User Manual
57
2.5 Best AU Parameters (SU only)
The Best AU tab is applicable to Subscriber Units only and enables you to
configure parameters related to the Best AU selection algorithm and the preferred
AU with which the Subscriber Unit should associate. If the Best AU feature is
activated, the SU assigns a grade based on performance level to each AU with
which it can associate. The SU then attempts to connect with the best AU, as
required.
Figure 2-18: Best AU Tab
The Best AU tab is comprised of the following components:
 Best AU Support: From the dropdown list, select whether to Enable or
Disable the Best AU feature. If disabled, the Subscriber Unit associates with
the first Access Unit that it locates with an identical ESSID or Operator
ESSID.
 Number of Scanning Attempts: Click the up and down arrows or enter a
number to the select the number of scanning cycles that the Subscriber Unit
uses to gather information regarding the neighboring Access Units. The
available values range from 1 to 255.
 Neighboring AU Table: A read-only display, the Neighboring AU Table
displays the information gathered by the Subscriber Unit during the last
scanning cycle.