User manual

Unit Configuration
BreezeCONFIG for BreezeACCESS VL and BreezeACCES 4900 User Manual
38
 Select DHCP Only to enable the unit to search for and acquire its IP
parameters, including the IP address, subnet mask and default gateway,
from a DHCP server. If this option is selected, configuring the static IP
parameters is not required.
 Select Automatic to enable the unit to search for a DHCP server and
acquire its IP parameters from the server. If a DHCP server is not located
within approximately 40 seconds, the current static parameters are used.
 Access to DHCP: From the dropdown list, select the port through which the
unit searches for and communicates with a DHCP server, from the following
options:
 From Wireless Only
 From Ethernet Only
 From Both
2.3.3 Run Time IP Settings
 IP Address: Displays the unit's current IP address.
 Subnet Mask: Displays the unit's current subnet mask.
 Default Gateway: Displays the unit's current default gateway.