User manual

Unit Configuration
BreezeCONFIG for BreezeACCESS VL and BreezeACCES 4900 User Manual
28
Figure 2-3: Unit Status Tab – Subscriber Unit
The Unit Status tab is comprised of the following components:
2.2.1.1 Properties
 Unit Type: Identifies the unit's functionality.
 AP Working Mode (AU only): Not applicable for current version.
 Unit Name: Enter a name for the selected unit.
 Location: A descriptive geographical or site location for the selected unit. A
string of up to 35 printable characters.
 MAC Address: Displays the unit's MAC address.
 Ethernet Negotiation Mode: Enter the Ethernet port negotiation mode. The
available options are:
 Auto Negotiation
 Force 10 Mbps and Half-Duplex
 Force 10 Mbps and Full-Duplex
 Force 100 Mbps and Half-Duplex
 Force 100 Mbps and Full-Duplex