User manual

Unit Control Parameters
BreezeCONFIG for BreezeACCESS VL and BreezeACCES 4900 User Manual
25
 Set Factory Defaults: Reverts the system parameters to the original factory
defaults, as follows.
 Click Full to revert most parameters to the selected set of factory default
values (refer to the System Manual for details on the parameters that are
not changed).
NOTE
You may lose connectivity to the unit.
 Click Partial to revert all parameters to the factory default values except
for those parameters that are necessary to ensure connectivity and
management access (refer to the System Manual for details on the
parameters that are not changed).
 Set Operator Defaults: Reverts the system parameters to the configuration
defined as the Operator's defaults. The Operator can define a configuration file
as the Operator's default, as described in Save Current Configuration as
Operator Defaults below.
 Click Full to revert most parameters to the selected set of Operator default
values (refer to the System Manual for details on the parameters that are
not changed).
NOTE
You may lose connectivity to the unit.
 Click Partial to revert all parameters to the Operator default values except
for the parameters necessary to ensure connectivity and management
access (refer to the System Manual for details on the parameters that are
not changed).
 Save Current Configuration as Operator Defaults: Enables you to save the
current configuration as a configuration file to be used as the Operator
defaults. To activate the Operator defaults refer to
Set Operator Defaults above.
 Export Configuration: Click Export to save the unit's configuration as a
BreezeACCESS configuration file, with the extension .acc. The Save As