User manual

Getting Started
BreezeCONFIG for BreezeACCESS VL and BreezeACCES 4900 User Manual
22
 Save to External Log: Defines whether the results of the upgrade process
are saved to a Log File. The default is Yes.
 Log File Name: Enables you to define the name and path to the external
Log File. Click the
icon on the right to open a Save As window, which
enables you to navigate to the required location and/or file.
 Conditional Downloading: If the number in the Version Number field (see
below) is identical the number of the Main version in the target device, the
downloading of a SW file to this device shall not be performed, regardless
of the option selected for Conditional Downloading. If the number in the
Version Number field is identical the number of the Shadow version in the
target device, the downloading of a SW file to this device shall be
performed only if the Conditional Downloading option is set to No. If it is
set to Yes, the numbers will be compared prior to starting the download
process, and downloading shall be performed only if the number in the
Version Number field is different from both the Main and Shadow versions.
 Version Number: This is an optional field. Enter the version number of
the firmware to be downloaded to enable version numbers comparison for
conditional downloading.
To work with the current and shadow software versions:
The active firmware version of multiple units can be managed as follows:
 Click on
to use the Shadow software version in the selected
devices. Note that this is only temporary, since the device(s) revert to the
Current version after the next reset.
 Click on
to define the currently active version as the new
Main version in the selected devices. The previous Main version will become
the new Shadow version.
The typical process is to run the Shadow version, and swap the Shadow and Main
versions only after verifying that the new version operates properly.