User manual

Working with the File Loading Utility
BreezeCONFIG for BreezeACCESS VL and BreezeACCES 4900 User Manual
21
5 Click on to modify the settings of the TFTP session used in the
upgrade download, as follows:
Figure 1-17: Advanced TFTP Setup
 Packet Timeout: Defines the time, in seconds, for which the upgrade
process waits for an acknowledgement message. The range is 1 to 30
seconds and the default is 3 seconds.
 Packet Retries: Defines the maximum number of retries, which is the
number of times a packet is retransmitted when an acknowledgement is
not received within the defined timeout period. The range is 1 to 5 and the
default is 3 retries.
 Session Retries: Defines the number of times the TFTP session is
restarted before determining that the upgrade procedure has failed. The
range is 1 to 5 and the default is 3 retries.
 Number of Parallel Sessions: Defines the maximum number of TFTP
sessions that can be conducted simultaneously. The range is 1 to 10 and
the default is 10. In the event of too many failures in the upgrade process
it is advised to reduce the value of this parameter.