User manual

Getting Started
BreezeCONFIG for BreezeACCESS VL and BreezeACCES 4900 User Manual
20
the devices with the specified version (by selecting the Only option), or to
select all devices excluding those with the specified version (by selecting the
Exclude option).
Figure 1-16: Select Device Window
To load new files:
1 From the Device List on the left side the window, select the units to which a
new file should be loaded. Use the standard Windows Shift and Ctrl key
commands to select multiple units.
2 Enter the applicable remote filename password for the file to be loaded. The
password is <read/write community string>.<file extension>. The default
read/write community string is private. The extension is:
 For compressed SW files: .bz.
 For country code files: .ccf.
 For Feature License files: .fln
 For Configuration files: .cfg
 For Operator Defaults files: .cmr
3 You can define the path to the required upgrade file in the applicable
selection boxes, or click the button on the right side of each of the selection
fields to open the Select filename window. There are separate selection fields
for AU files and SU files. The available fields correspond to the devices
selected from the Device List. For example, if the devices selected do not
include any AUs, the relevant AU selection field is disabled.
4 Click on
to initiate the file loading. A log of the upgrade process is
displayed during and after the operation.