User manual

Getting Started

BreezeCONFIG for BreezeACCESS VL and BreezeACCES 4900 User Manual

1.7 Working with the File Loading Utility

The File Loading utility enables you to upgrade the embedded unit software and

determine the current active software version for multiple managed units. It also

enables you to load new country code files, feature license files, configuration files

or operator defaults files. The files can be simultaneously downloaded to multiple

units of any type, such as AUs and SUs.

To access the File Loading utility, from the Mode menu, select File Loading

Window. The File Loading Window is displayed, as shown below.

Figure 1-13: File Loading Window

The Device List is displayed in the left side of the window. Each entry includes

the device IP address, unit type, current software version, shadow software

version and the software version to be used after the next reset.

When the File Loading utility is accessed, the current Device List in the main

Configuration Utility window is automatically loaded to the Device List of the File

Loading utility. The Device List can also be loaded with device information using

any combination of the following alternatives:

 Local Network Autodiscovery: For a description of how to work with this

feature, refer to section

1.3.1 .

 Locate Device: For a description of how to work with this feature, refer to

section

1.3.2 .