User's Manual

Menus and Parameters
Manual Revision 1.0
4-47
SNMP Traps
The SNMP submenu enables or disables the transmission of SNMP
Traps. If this option is enabled, up to 3 IP addresses of stations to
which SNMP traps are sent can be defined.
Send SNMP Traps
The Send SNMP Traps option enables or disables the sending of SNMP
traps. The following options are available:
 Enable Traps Sending
 Disable Traps Sending
The default selection is Disable Traps Sending.
SNMP Traps IP Destination
The SNMP Traps IP Destination option enables defining up to 3 IP
addresses of devices to which the SNMP Traps are to be sent.
The default of all three SNMP Traps IP destinations is 0.0.0.0.
SNMP Traps Community
The SNMP Traps Community option enables defining the Community
name for each IP address to which SNMP Trap messages are to be sent.
Valid strings: Up to 8 ASCII characters.
The default for all 3 addresses is public, which is the default Read
community.