User's Manual

Chapter 4 - Operation and Administration
BreezeNET B System Manual
4-36
Operator ESSID Parameters (BU only)
The Operator ESSID Parameters submenu includes the following
parameters:
Operator ESSID Option
The Operator ESSID Option enables or disables the use of Operator
ESSID for establishing association with RBs.
The default is Enable.
Operator ESSID
The Operator ESSID parameter defines the Operator ESSID.
Valid values: A string of up to 31 printable ASCII characters.
The default value is ESSID1.
NOTE
The Operator ESSID string is case sensitive.
Frequency Definition Parameters
Frequency Definition Submenu in BU
The Frequency Definition submenu in BU includes a single parameter
for setting the transmit/receive frequency:
Frequency
The Frequency parameter defines the transmit/receive frequency. The
minimum distance between frequencies used by two neighboring BUs is
the Channel bandwidth, which is 20 MHz.
The range is from 5740 to 5830 MHz, using a 10 MHz resolution.
The default is 5740 MHz.