User's Manual

Chapter 4 - Operation and Administration
BreezeNET B System Manual
4-26
¾ Decrypt: The number of frames that were not received properly
due to a problem in the data decryption mechanism.
 Bad frames received: The number of frames received from the
wireless media containing CRC errors.
 Duplicate frames discarded: The number of data frames discarded
because multiple copies were received. If an acknowledgement
message is not received by the originating unit, the same data frame
can be received more than once. Although duplicate frames are
included in all counters that include data frames, only the first copy
is forwarded to the Ethernet port.
Ping Test
The Ping Test submenu is used to control pinging from the unit and
includes the following options:
 Destination IP Address: The destination IP address of the device
being pinged. The default IP address is 192.0.0.1.
 Number of Pings to Send: The number of ping attempts per
session. The available range is from 0 to 9999. The default value is
1. Select 0 for continuous pinging.
 Ping Frame Length: The ping packet size. The available range is
from 60 to 1472 bytes. The default value is 64 bytes.
 Ping Frame Timeout: The ping frame timeout, which is the amount
of time (in ms) between ping attempts. The available range is from
200 to 2000 ms, in increments of 200 milliseconds. For example,
200, 400, 600…2000. The default value is 200 ms.
 Start Sending: Starts the transmission of ping frames.
 Stop Sending: Stops the transmission of ping frames. The test is
automatically ended once the number of pings has reached the
value specified in the No. of Pings parameter, described above. The
Stop Sending option can be used to end the test before completing
the specified number of pings, or if continuous pinging is selected.
 Show Ping Test Values: Displays the current values of the ping test
parameters, the transmission status, which means whether it is
currently sending or not sending pings, the number of pings sent,
and the number of pings received, which means the number of
acknowledged frames.